sdb

SNS SAC Series F.R.L relief type air source treatment combination filter regulator lubricator

Short Description:

1,The working medium of gas source processor should use clean and dry compressed air, and the air in the piping should be fully blown to prevent impurities from bringing into the system and causing bad action of cylinders and valves. The fuel mist in the piping system should be lubricated.
2,After the air source processor maintains the normal operation of the system, it is necessary to check the working conditions of air filters and oil mists regularly, and to discharge and refuel water in time.
3,Often check the operation of various pneumatic components, check whether the fastening bolts are loose? Is there any damage or leakage in the seal of the element?
4,When maintaining, it is necessary to shut down the gas source beforehand and empty the compressed air in the pipeline system before carrying out maintenance work.
5,Components must be cleaned when repairing and reassembling, and impurities must not be brought into the system.


Product Detail

Product Tags

Model SAC2010-01 SAC2010-02 SAC3010-01 SAC3010-01
Module Filter Regulator SAW2000 SAW2000 SAW3000 SAW3000
Lubricator SAL2000 SAL2000 SAL3000 SAL3000
Port Size PT1/8 PT1/4 PT1/4 PT3/8
Pressure Gauge Port Size PT1/8 PT1/8 PT1/8 PT1/8
Rated Flow(L/Min) 500 500 500 500
Working Media Compressed Air
Proof Pressure 1Mpa
Range of Regulation 0.05~0.85Mpa
Ambient Temperature 5~60℃
Filter Precision 40 μ m(Normal)or 5 μ m(Customized)
Suggested Lubricating Oil Turbine NO.1 Oil(ISO VG32)
Bracket(one) S230 S330
Pressure Gauge    Y40-01                                                             Square  Pressure  gauge
Material Body Material Aluminum Alloy
Cup Material PC,ABS
Cup Cover SAC2010:without     SAC3010:with(Steel)

SAC 2

 

 

Model Port Size A B C D E F G H J K L M
SAC2010 PT1/8,PT1/4 91 162.5 64 42 47 34 46 24 5.3 8.2 4.5 54
SAC3010 PT1/4,PT3/8 118 229.5 83.5 53 29 41.5 59 34.5 7 11 6 68

 

Note :
NPT thread can be customized.


  • Previous:
  • Next:

  • Write your message here and send it to us