SNS SFC Series pneumatic air filter regulator lubricator F.R.L air source treatment unit

Short Description:

1,The working medium of gas source processor should use clean and dry compressed air, and the air in the piping should be fully blown to prevent impurities from bringing into the system and causing bad action of cylinders and valves. The fuel mist in the piping system should be lubricated.
2,After the air source processor maintains the normal operation of the system, it is necessary to check the working conditions of air filters and oil mists regularly, and to discharge and refuel water in time.
3,Often check the operation of various pneumatic components, check whether the fastening bolts are loose? Is there any damage or leakage in the seal of the element?
4,When maintaining, it is necessary to shut down the gas source beforehand and empty the compressed air in the pipeline system before carrying out maintenance work.
5,Components must be cleaned when repairing and reassembling, and impurities must not be brought into the system.

Product Detail

Product Tags

Model SFC 200 SFC 300 SFC 400
Port Size PT1/4 PT3/8 PT1/2
Working Media Compressed Air
Proof Pressure 1.5Mpa
Max. Working Pressure 0.85Mpa
Working Temperature Range 5-60℃
Filter Precision 40 μm (Normal) or 5 μm (Customized)
Suggested Lubricating Oil Turbine No. 1 Oil (ISO VG32)
Material Body Material Aluminum Alloy
Cup Material PC
Cup Cover Plastic


  • Previous:
  • Next:

  • Write your message here and send it to us