China SNS TN Series dual rod double shaft pneumatic air guide cylinder with magnet Manufacturer and Supplier

SNS TN Series dual rod double shaft pneumatic air guide cylinder with magnet

Short Description:

1. The Double-Axle Cylinder Adopts Embedded Body Mounting And Fixing Form, Which Saves Installation Space.
2. It Has Certain Bending And Torsion Resistance, And The Two-Axle Cylinder Can Withstand A Certain Lateral Load.
3. There Are Mounting Holes On Three Sides Of The Fixing Plate, Which Is Convenient For Multi-Position Loading.
4. The Front-End Anti-Collision Gasket Of The Double-Axle Cylinder Body Can Adjust The Stroke Of The Cylinder And Alleviate The Impact.
5. The Standard Configuration Of This Series Of Double-Axle Cylinders Is Magnetic Type, And All Of Them Are Optional Without Magnetic Type.

Send email to us

Product Detail

Product Tags

Bore Size(mm)	10	16	20	25	32
Acting Mode	Double Acting
Working Media	Cleaned Air
Working Pressure	0.1~0.9Mpa(1-9kgf/cm²)
Proof Pressure	1.35Mpa(13.5kgf/cm²)
Temperature	-5~70℃
Buffering Mode	Bumper
Port Size	M5*0.8				G1/8”
Body Material	Aluminum Alloy

Bore Size(mm)	Standard Stroke(mm)	Max.Stroke(mm)	Sensor Switch
10	10 20 30 40 50 60 70 80 90 100	100	CS1-J
16	10 20 30 40 50 60 70 80 90 100 125 150 175 200	200
20	10 20 30 40 50 60 70 80 90 100 125 150 175 200	200
25	10 20 30 40 50 60 70 80 90 100 125 150 175 200	200
32	10 20 30 40 50 60 70 80 90 100 125 150 175 200	200

Note: The cylinder with non-standard stroke (within 100mm) the dimension is same asthe cylinder with standard stroke bigger than this non-standard stroke. Forexampie, the cylinder with stroke size 25mm, its dimension is same as thecylinder with standard stroke size 30mm.