News

On the air filter maintenance, should carefully its paper filter core inside and outside the surface layer of filter paper tone and gap. The outer layer on the air-contact side of the filter cartridge is dark gray due to dust accumulation, while the inner layer on the air-intake side of the filter paper should still show its primary color. If the dust on the outer surface of the filter core is removed, the primary color of the filter paper can be displayed, then the filter core can be used again. When the filter core surface layer through the elimination of dust, the primary color of the paper will no longer appear, or the filter paper inside the surface color is dark, the filter core must be removed. In general, under the circumstances, the manufacturer of each car and the Invitational Repair Center are air-filtered Proposal Replacement Cycle Time (Note) , the buyer just need to do as required, if the road is more dusty, minimize the cleaning and removal mileage of air filters. When dismantling and replacing good enough to special invitation maintenance center to carry out, if the buyer is accustomed to their own choice and purchase of spare parts, then the first thing you must find out which model of your car with which specifications, which materials air filter, must apply manufacturer-specific high-quality air filtration, purchase to identify the direct false, must not pass the application of air filtration loading. Second, the application of air filtration misconception and its quality discrimination the efficacy of air filtration is to filter the air into the cylinder of fine particles floating in order to reduce the cylinder and Piston Rod, engine Piston damage. The automobile engine works in the need three kinds of material, the gas use quantity is big, and comes from the air. If the air filter can not reasonably filter out the floating fine particles in the air, it can speed up the damage of cylinder, Piston Rod and Engine Piston, it can lead to cylinder contusion and reduce the service life of automobile engine. 2. dehumidifying Operation Setting; as with the cooling setting, select the mode key on the top of the controller first, and then apply the up and down Arrow function keys to adjust the temperature until a water mark occurs on the top of the display, select the appropriate temperature; 3, Wind Band selection settings; can be seen on the top of the monitor, everyone application mode key adjustment to 01, and then use the left and right Arrow keys to carry out the regulation of the Centrifugal Fan, at this time we have two choices, one is 01, the third gear, the other is 02, high third gear, and generally speaking, the default settings of the air conditioning system recovery is 01, then we can choose according to their own preferences, and then press and hold down the key to determine

China SNS Pneumatic was founded in 1999 which now has been the leading supplier of pneumatic components in China. The company covers an area of 30000 ㎡, having 5 production bases and more than 20 subsidiary companies with more than 1000 employees.SNS has passed ISO9001 and 2000 Quality Management System Certification because of its good service and high quality. By now there are more than 200 agents and distributors all over the world and we are looking forward to approach more international market.

Company: China SNS Pneumatic Co., Ltd.
Address: No.186 Weiliu Road, Economic Development Zone, YueQing, Zhejiang, CHINA
E-mail: zoe@s-ns.com
Phone: 057762768118

https://www.sns1999.com/