-
What kind of gate valve does manual gate valve belong to
The opening and closing parts of the manual stop valve are gate valves. The fitness direction of the gate valve is perpendicular to the liquid direction. The stop valve can only be fully opened and fully closed, and can not be adjusted or throttled. The gate valve has two raised faces. The...Read more -
Working principle of solenoid valve
“There is a sealed cavity in the solenoid valve, and there are embedded holes in different parts. Each hole is connected with different oil pipelines. The piston rod is in the middle of the cavity, and two electromagnetic coils are on both sides. The magnetic stone solenoid coil plug-in oil...Read more -
What is a manual valve
Manual valve is a kind of mechanical equipment used to operate. The key function of manual valve is to operate liquid. If the opening and closing torque of gate valve is relatively large, we can set a wheel or worm gear between the spindle and valve seat as reducer. There are many types of manual...Read more -
How to control water by solenoid valve
There is a closed cavity in the solenoid valve for water supply. There are buried holes in different parts. Each hole leads to a different oil pipeline. In the middle of the cavity is a valve, and there are two solenoid coils on both sides. The magnet solenoid coil on which side is plugged into t...Read more -
What is a solenoid valve?
Solenoid valve is a basic component of automatic technology used to manipulate liquid. It is widely used in industrial production automatic control system. It has the function of adjusting the main parameters such as total flow, speed and material orientation. Solenoid valve has the characteristi...Read more -
How to adjust the pressure of relief valve
“The way to adjust the working pressure of the pressure reducing valve is as follows: 1. Open the angle needle valve; 2. Loosen the precise positioning rod and turn up the top adjusting rod in the opposite direction; 3. Open the front water seepage (gate or butterfly) valve; 4. Tighten the ...Read more -
How to adjust the pressure reducing valve
1. Firstly, close the stop valve in front of the pressure regulating valve and open the stop valve after the pressure regulating valve to produce the natural environment of bottom pressure in the middle and lower reaches; secondly, turn the adjusting screw in the opposite direction to the uppermo...Read more -
Difference between pressure stabilizing valve and pressure reducing valve
Pressure regulating valve is a kind of machine and equipment which can reduce the material with high working pressure to that with low working pressure. Pressure stabilizing valve is a kind of machine and equipment which can maintain the material in a certain working pressure range in an area. Th...Read more -
Air control valve
A gas pressure regulating valve, which is characterized by: a single flow valve (4) is arranged above the oil circuit plate (1), an installation seat (9) is arranged under the oil circuit plate (1), a leather pad (10) is set between the lower part of the oil circuit board and the mounting seat; t...Read more -
Can mechanical valves be called valves?
It is not very good to say from the surface, if it is a valve, it is only this product. The general valve is a part of valve seat, valve center, high pressure gate valve, oil circuit board, sealing, etc. this figure feels more like connecting the inlet and outlet of a high-pressure vessel or the ...Read more -
What is the difference between solenoid valve and ordinary mechanical valve?
The key difference between the solenoid valve and the general mechanical equipment gate valve is that the driving force for opening or closing the valve comes from different sources. The solenoid valve mainly relies on the electromagnetic force to control the posture of the valve core, while the ...Read more -
What’s the difference between muffler and muffler?
connected by a vortex line. The ring-shaped metal corrugated pipe is a kind of tube-shaped shell with a closed-loop ripple. The wave and the wave are connected by a circular ripple. The annular metal corrugated pipe is made of seamless steel pipe or welded pipe fittings. Controlled by the product...Read more
